Step 1: Wash Your Hands
• Wash your hands thoroughly with soap and water before unwrapping the tampon.
Step 2: Unwrap the Tampon
• Tear open the wrapper and inspect the smooth plastic applicator.
• Notice the parts: the outer tube holding the tampon, the contoured anti-slip grip area in the middle, and the inner plunger (pusher) at the bottom with the removal string hanging out.
Step 3: Get Into a Comfortable Position
• Sit on the toilet or stand with a slight squat or one foot propped up on a low stool or the edge of the tub.
• Take a deep breath and relax your muscles (tensing up makes insertion harder).
Step 4: Position and Angle the Tampon
• Hold the applicator at the anti-slip grip using your thumb and middle/index finger.
• Place the rounded tip of the applicator at your vaginal opening.
• Angle the tampon slightly toward your lower back (not straight up), matching the natural slant of your vaginal canal.
Step 5: Insert the Applicator
• Gently slide the outer tube into your vagina, pushing all the way up until your fingers on the grip touch your vulva (the outer skin).
Step 6: Push the Plunger and Remove the Applicator
• Push the inner plunger all the way into the outer tube with your index finger to release the tampon inside your body.
• Pull both tubes of the plastic applicator out of your vagina, leaving only the clean string hanging outside.
• Throw the used applicator in the trash (do not flush it).
Removal and Safety Tips
• When to change: Change your tampon every 4 to 6 hours (or sooner if your flow is heavier), and never leave a single tampon in for more than 8 hours.
• How to remove: Relax, take hold of the hanging string with your thumb and index finger, and pull it out gently at a slight downward angle.
• Absorbency check: Super absorbency is meant for medium-heavy flow. If it feels uncomfortable or dry to remove after 4–6 hours, try dropping down to a "Regular" absorbency