Step-by-Step Instructions
1. Clean items first: Wash all baby bottles, parts, and accessories thoroughly with hot soapy water or a dedicated cleanser like the NUK Baby Bottle Cleanser before sterilizing.
2. Add water: Pour the recommended amount of water into the base of the steriliser. (Check your user manual for the exact water line or measurement, typically around 110 ml / 6.76 oz depending on the model specs).
3. Load the bottles and accessories:
• Place up to four 300 ml wide-necked bottles (or compatible standard bottles) upside down into the designated slots on the internal bottle holder.
• Arrange teats, caps, and other small accessories on the remaining space around the holder.
4. Secure the lid: Put the transparent lid on and turn it clockwise until the safety latch/locking system clicks shut.
5. Microwave according to wattage: Place the steriliser in the microwave and set the time based on your microwave's output:
• 1000 W: 4 minutes
• 800–950 W: 5 minutes
• 500–750 W: 7 minutes
(Do not exceed the recommended time).
6. Cool down: Warning: Wait 5 minutes after the microwave cycle finishes before opening or removing the steriliser to prevent scalding from hot steam or moisture.
7. Remove items: Unlock and turn the lid anticlockwise, then use the included bottle tongs to safely lift out your sterile gear.
8. Maintenance: Wipe the base dry with a cloth after each use to prevent limescale buildup. The unit is also dishwasher-safe