• First use: Disassemble all parts and boil them in water for 5 minutes before the very first use.
• Regular cleaning: Wash all components in hot, soapy water after every use. Use the included small wire-brush only for cleaning the internal vent system—do not use it on the silicone nipples. All parts are top-rack dishwasher-safe and sterilizer-safe.
2. How to Assemble with the Internal Vent System (Anti-Colic Mode)
• Fill the bottle: Pour breast milk or formula into the bottle, making sure not to overfill past the fill line marked on the bottle.
• Prepare formula: If using formula, avoid shaking the bottle (which creates bubbles and can force liquid into the vent); instead, stir gently with a spoon or use a mixing pitcher.
• Assemble the vent: Snap the green/blue internal vent insert onto the reservoir tube.
• Insert the vent: Place the assembled vent system directly into the liquid inside the bottle.
• Attach the nipple and collar: Snap the silicone nipple into the teat collar. Place it loosely on top of the bottle while warming, or tighten snugly if not heating.
3. Warming Tips
• Keep the collar loose: Either heat the bottle without the collar attached, or loosen the collar by about half a turn during warming to prevent air expansion from pushing liquid through the vent. Tighten snugly before feeding.
• Avoid overheating: Do not warm the liquid above body temperature (roughly 98°F / 37°C). Never use a microwave to heat the bottle.
4. Feeding Your Baby
• Using without the vent: As your baby grows (around 4 months or when feeding matures), you can remove the internal vent system entirely and use the bottle like a standard teat-vented bottle.
• Angle: Hold the bottle at roughly a 45-degree angle during feeding so the nipple stays filled with milk.