1. Prep the Items
• Clean and rinse all baby bottles, pump parts, pacifiers, and accessories thoroughly with soap and water before placing them in the bag.
• Disassemble all bottle parts (teats, collars, vents, caps).
2. Add Water
• Pour 2 oz (60 mL) of water into the bag (or fill to the designated fill line). Do not use less water, as it can distort the parts or the bag.
3. Load and Seal
• Place the disassembled parts inside the bag. Do not overfill.
• Seal the top of the bag tightly.
4. Microwave
• Place the bag flat/centered on the microwave turntable.
• Set the microwave time based on your wattage:
• 1100W or higher: 1.5 minutes (90 seconds)
• 800W – 1100W: 3 minutes (or up to 5 minutes depending on model guidance)
• 500W – 750W: 5 minutes
5. Cool Down and Empty
• Allow the bag to cool for at least 10 minutes before touching or opening it to avoid burns from hot steam.
• Use an oven mitt, potholder, or towel to handle the bag.
• Pour out any excess water safely through the built-in steam/drain vent on the corner of the bag before opening it